McAfee QUICKCLEAN 3.0 Guía de usuario descargar pdf (Pagina 132)

set intfport ip

Sets an IP address to an interface port.

Syntax:

set intfport <1><2><3> ip A.B.C.D E.F.G.H

Example:

set intfport 1 10.10.10.10 255.255.255.0

set intfport speed duplex

Set the speed and duplex setting on the specified interface port.

Syntax:

set intfport <1><2><3> speed <10 | 100> duplex <half | full>

Parameter Description

<1> <2> <3> Enter an interface port ID for which you want to set the speed and duplex.

<10 | 100> Sets the speed on the interface port. The speed value can be either 10 or 100

<half | full> Sets the duplex setting on the interface port. Set the value "half' for half duplex and

full for 'full' duplex.

Example:

set intfport 1 speed 100 duplex full

set mgmtport auto

Configures the network port to auto-negotiate the connection between the McAfee Advanced Threat

Defense Appliance and the immediate network device.

This command has no parameters.

Syntax:

set mgmtport auto

Default Value:

By default, the network port is set to auto (auto-negotiate).

set mgmtport speed and duplex

Configures the network port to match the speed of the network device connecting to the McAfee

Advanced Threat Defense Appliance and to run in full- or half-duplex mode.

Syntax:

set mgmtport <speed <10 | 100> duplex <full | half>>

Parameter Description

<10|100> sets the speed on the Ethernet network port. The speed value can be either 10 or 100

Mbps. To set the speed to 1000 Mbps, use the set mgmtport auto command.

<half|full> sets the duplex setting on the Ethernet network port. Set the value half for half duplex

and full for full duplex.

CLI commands for McAfee Advanced Threat Defense

List of CLI commands

132

McAfee Advanced Threat Defense 3.0.4 Product Guide

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 138 139 140

Sin comentarios

McAfee QUICKCLEAN 3.0 Guía de usuario Pagina 132